Ti-6al-4v Titanium Alloy Bar

Ti-6al-4v Titanium Alloy Bar Tlhaloso

Ti-6al-4v titanium alloy ke motsoako oa mekhahlelo e 'meli e nang le thepa e ntle e pharaletseng, botsitso bo botle ba microstructure, ho tiea hantle, polasetiki le thepa e phahameng ea mocheso,' me e ka sebetsoa hantle ka ho hatella ho chesang, ho tima le ho tsofala. Alloy e matlafalitsoeng. Matla ka mor'a phekolo ea mocheso ke hoo e ka bang 50% ho 100% e phahameng ho feta ka mor'a hore annealing. Matla a mocheso o phahameng, a ka sebetsa nako e telele ho 400 ℃ ~ 500 ℃, botsitso ba mocheso ha bo hantle joaloka alloy ea α titanium.

Pontšo ea setšoantšo sa Ti-6al-4v Titanium Alloy Bar

Ti-6al-4v Titanium Alloy Bar kalafo ea mocheso

Ho imolla khatello ea kelello ho loketse bakeng sa li-alloys tsa titanium le titanium ka mor'a ho sebetsa ho chesa le ho bata. Annealing e boetse e sebelisoa ho tsosolosa kapa ho tsosolosa microstructure e holofetseng. Ka hona, annealing e sebetsa hantle bakeng sa ho tsitsisa microstructure le boholo ba lihlahisoa tse phekoloang, ho ntlafatsa ts'ebetso ea ho itšeha le thepa ea mochine.

Joalo ka li-alloys tse ling tsa titanium, khanyetso ea kutu ea Ti 64 alloy e ipapisitse le boteng ba lera le tsitsitseng le le tsoelang pele la oxide le itlhahelang feela ha le pepesehela oksijene. E na le ts'ebetso e ntle haholo ea ho thibela ho bola metsing a leoatle, e leng se etsang hore e be se loketseng bakeng sa ts'ebetso ea oli le khase e ka tlase ho leoatle moo metsi a leoatle a amehileng ka ho bola le boima ba 'mele.

Ti-6al-4v Titanium Alloy Bar Machinability le Ho theha

Thepa ea 6Al-4V e ne e bapisoa le ea 316 tšepe e sa hloekang. Mekhoa e khothalelitsoeng e kenyelletsa phallo e phahameng ea sepholi (ho thibela mocheso o tlase oa thepa), lebelo le tlase le litefiso tse batlang li le holimo tsa phepelo.

Alloy ena e ka fetoha e chesang kapa e batang. Mekhoa e tsebahalang e kenyelletsa hydraulic, ho otlolla kapa hamore ea ho theola. Karabelo ea thepa ena e tšoana le ea letoto la 300 la tšepe e sa hloekang.

Titanium e atisa ho sebelisoa e le thepa ea lihlahisoa tse entsoeng ka mochine oa khatiso ka lebaka la bokhoni ba eona ba ho kobeha ho bata le ho etsa mochine oa khatiso. Formability e fapana ho latela mofuta oa alloy ea titanium. Mokhoa oa ho theha o sebelisitsoeng o tšoana le oa tšepe e sa hloekang, haholo-holo mekhoa ea ho hatisa e kang ho kobeha, ho taka ka botebo, ho otlolla le ho ohla. Tlas'a maemo a kalafo ea tharollo, li-alloys tsa titanium li ka ba tse batang. The post-forming titanium alloy e ka fuoa kalafo ea botsofali, 'me matla a ka fihla ho 1300-1500MPa.

Ti-6al-4v Titanium Alloy Bar e chesang e sebetsa ebile e bata e sebetsa

Thermoforming e tla fokotsa nako ea selemo le matla a hlokahalang a ho theha, le ho eketsa ductility ka kakaretso ea thepa.

Lisebelisoa tse batang tsa ho sebetsa tsa thepa ena li tšoana le tsa li-stees tse sa hloekang tsa austenitic. Nakong ea ts'ebetso e mengata ea ho etsa mesebetsi, khatello ea maikutlo e bohareng e khothalletsoa ho loantša mokhoa o thata oa ho sebetsa oa alloy. Ho hlokahala hore ho hlakoloe ka mor'a phekolo.

1.Q: Khamphani ea hau e etsa eng?

 A: Khampani ea rona ke moetsi oa litsebi. Haholo-holo re hlahisa titanium le zirconium pipe fittings/nickel alloy pipe fittings/flanges/nickel alloy flanges/liphaephe tsa moetlo

2.Q: Melemo ea k'hamphani ea hau ke efe?

A:

(1): Boleng bo phahameng le theko e utloahalang.

(2): Phihlelo e ruileng tšebeletsong ea ka mor'a thekiso.

(3): Ts'ebetso e 'ngoe le e' ngoe e tla hlahlojoa ke QC e ikarabellang ho netefatsa boleng ba sehlahisoa se seng le se seng.

(4): Sehlopha sa litsebi tsa ho paka ho netefatsa polokeho ea sephutheloana ka seng.

(5): Taelo ea teko e ka phethoa nakong ea beke.

(6): Mehlala e teng ka kopo ea hau.

3.Q: Ho thoe'ng ka theko ea hau?

A: Ka lebaka la tsamaiso ea rona e ntle le taolo ea litšenyehelo, theko ea rona e fanoe haholo. Haeba u thahasella, ka kōpo ikutloe u lokolohile ho ikopanya le rona.

4. Q: Nako ea hau ea ho fana e kae?

A: Lihlahisoa tse fapaneng li na le linako tse fapaneng tsa ho etella pele. Hangata nako ea ho fana e ka hare ho matsatsi a 7 ho isa ho a 15 ka mor'a hore re fumane depositi ea hau.